GTA04 U-Boot

GTA04 U-Boot Commits

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 Next
Apr 20, 2005
8 years 1 month * Patch by Matthias Fuchs, 18 Apr 2005: Make PCI target address spaces on PMC405 and CPCI405 boards configurable via environment variables
Apr 14, 2005
8 years 2 months Add support for canmb board
Apr 13, 2005
8 years 2 months * Patch by Stefan Roese, 13 Apr 2005: Update for esd apc405
8 years 2 months Update for esd apc405
8 years 2 months * Fixes for TQM8560 board: - fix clock rates - remove debug messages - fix flash sector protection
Apr 8, 2005
8 years 2 months Cleanup
8 years 2 months * Patch by Steven Scholz, 07 Apr 2005: Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
Apr 7, 2005
8 years 2 months * Patch by Stefan Roese, 06 Apr 2005: Updates for OCOTEA board: - Changed U-Boot size from 512kByte to 256kByte - Fixed flash driver to support boot from soldered user flash - Added README for switch from PIBS firmware to U-Boot
8 years 2 months Add PPC440GX Revision C
8 years 2 months * Patch by Travis Sawyer, 05 Apr 2005: - Change timer frequency for ppc 440 from 10 ms to 1 ms. Problem found by Andrew Wozniak.
Apr 6, 2005
8 years 2 months Patch by Steven Scholz, 06 Apr 2005: - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
8 years 2 months * Patches by Robert Whaley, 29 Nov 2004: - update the pxa-regs.h file for PXA27x chips - add PXA27x based ADSVIX board - add support for MMC on PXA27x processors
8 years 2 months * Patch by Ladislav Michl, 05 Apr 2005: Add support for VoiceBlue board.
8 years 2 months Patches by Steven Scholz, 05 Apr 2005: - Use i.MX watchdog timer for reset_cpu() - Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/ (now in interupts.c)
Apr 5, 2005
8 years 2 months Add support for MPC8220 based "sorcery" board.
8 years 2 months Add support for TQM8560 board
8 years 2 months * Add FEC support for TQM8540 board. Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
Apr 4, 2005
8 years 2 months Patch by Steven Scholz, 4 Apr 2005: - remove all references to CONFIG_INIT_CRITICAL for ARM based boards - introduce two new configuration options instead: CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
8 years 2 months Use the same name (lowlevel_init) for all (ARM) boards
8 years 2 months Patch by Steven Scholz, 04 Apr 2005: Make sure that MDIO clock does not exceed 2.5 MHz on AT91

All Updates

Filter by type
Commits
Issues and Comments
Downloads
Documents

Subscribe to this timeline
RSS Atom feed