You are looking at an old revision of the page Build. This revision was created by Nikolaus Schaller.

Table of Content

How to Build the Letux Kernel from Source

Introduction

Add your content here.

Details

Get sources by:

git clone git://projects.goldelico.com/gta04-kernel.git cd linux-omap-2.6

Build:

export ARCH=arm export CROSS_COMPILE=arm-angstrom-linux-gnueabi- # adapt to your toolchain

make distclean make omap3_gta04_defconfig make menuconfig # only needed if you want to change the default configuration make uImage

The result will be the file arch/arm/boot/uImage. Copy this file to the FAT partition of your SD card.