LetuxOS U-Boot

Issue 30: LCM detection does not work

Reported by Nikolaus Schaller, Mar 19, 2010

The idea is to write some 0 and 1 bits to the DOUT GPIO and read 
back through DIN. This should allow to recognized if R202 is 
installed or not.

Unfortunately this does not reliably work :(

Comment 1 by Nikolaus Schaller, Mar 20, 2010

Problem was that R202 is 10kOhm (instead of 1kOhm). Therefore the 
PUP/PDN collide.
Status: Fixed

Created: 14 years 3 months ago by Nikolaus Schaller

Updated: 14 years 3 months ago

Status: Fixed

Owner: Nikolaus Schaller