Letux Kernel


You are looking at an old revision of the page Build. This revision was created by Nikolaus Schaller.

Table of Content

How to Build the Letux Kernel from Source


This describes briefly how to compile the hardware validation kernel from git source. You need to have some ARM cross compiler installed on your host.


Get sources by:

git clone git://projects.goldelico.com/gta04-kernel.git
cd gta04-kernel/


export ARCH=arm
export CROSS_COMPILE=arm-angstrom-linux-gnueabi-  # adapt to your toolchain

make distclean
make omap3_gta04_defconfig modules

make menuconfig  # only needed if you want to change the default configuration
make uImage

The result will be the file arch/arm/boot/uImage. Copy this file to the FAT partition of your SD card.


Patches should follow these guidelines.